Wine Rack / Bottle Display — Build Plan (#10)

Build a wall-mounted rack that stores five wine bottles neck-out through a notched rail and hangs five glasses by their stems below the top shelf. This 5-page PDF plan (Build Plan No. 10 in the Fox Feather Farms winter series) makes the 24 x 13.5 in (61 x 34 cm) rack from two 1x6 pine boards — all straight cuts and routed notches.

Inside: layout diagrams (front and side views with callouts), a complete cut list for the shelves, bottle rail, glass strip, side cheeks, and rear cleat, the notch and slot geometry spelled out (2 in U-notches on 4.8 in centres; 3/8 in glass slots with a 1 in entry hole), a full materials list with per-line costs in Canadian dollars (about $42 typical), the tools required, finishes and cure times, and a 6-step build summary. Builder's notes add a 16 in 3-bottle version built from the same parts logic and the walnut upgrade. Safety notes included — the hangers land on wall studs, never drywall anchors alone. About 3–4 hours of active work plus 24 hours of finish cure.